The complete guide
A Practical Guide to Choosing This Mallet Golf Putter
Choosing a putter can feel harder than it should. Two clubs may look similar in a photo, yet the length, grip and alignment marks can make them feel quite different when you stand over a ball. The useful question is not which one promises the most. It is which setup gives you the features you want at address.
This Mallet Golf Putter offers a defined set of choices. It is right-handed and 35 inches long, with a high-MOI mallet head, T-shaped sight lines and an oversized rubber grip. Knowing what those details mean helps you decide whether it belongs on your shortlist.
Start with the fit, not the feature list
Before comparing head designs, check the basics that cannot be judged from a product photo. Hand orientation comes first. This model is for right-handed play, and no left-handed option is specified in the maker's description.
Next, consider the listed 35-inch length. A familiar putter can be a useful point of reference. Compare its length and notice how you stand when using it. If you already feel cramped or stretched over your current club, copying its length without thought may not answer your needs.
The maker does not provide a height chart or personal fitting advice. If length is uncertain, a fitting is more useful than guessing from your height alone. The aim is to choose with a clear idea of your normal setup.
What the mallet head brings
The head is listed as a high-MOI mallet with extra weighting at the rear heel and toe. MOI refers to resistance to twisting. Here, the weighting is intended to help when contact is away from the center of the face.
That makes this a high MOI putter worth comparing if forgiveness is on your list. It does not mean every strike will behave the same, nor does it remove the need to judge line and pace. It identifies the design approach used in the head.
The specifications describe the forgiveness level as high. No measured MOI value or comparison test is supplied, so there is no sound basis for claiming a particular gain over your current club. Treat the design as a feature to assess, not a promised score change.
Read the alignment guide at address
A putter with alignment line markings gives you a visible reference when setting the face. This model uses a T-shaped arrangement, with both parallel and perpendicular sight lines.
The practical step is simple. Choose the line you want the ball to start on, then use the marks to check how the face sits against that line. Take a moment to see whether the shape makes sense to your eye.
A T-shaped alignment putter may appeal if you prefer more than one visual reference. Others prefer a simpler look. Neither preference can be settled by a specification sheet, so consider what has worked for you on clubs you have used before.
Keep the role of the marks in perspective. They help with setup. They do not read the green or decide how firmly to strike the ball.
Consider the soft face insert
This model has a soft face insert described as providing added feel, a consistent roll and a muted sound at impact. Sound and feel are worth noting because they are part of the feedback you notice during a putt.
A soft face insert putter may interest you if you prefer a quieter impact sound. Still, the maker's description does not provide a sound measurement or a firmness rating. It also does not state the insert's exact material.
If you are comparing this club with another model, compare what is actually stated. Avoid assuming that two inserts will feel identical because both are described as soft. That word alone does not tell the whole story.
Give the grip proper attention
The grip is oversized, textured and made from rubber. It is also described as counterbalanced. Those details matter because the grip is the part of the club you hold throughout the stroke.
An oversized grip putter offers a larger holding surface than a smaller grip format. Whether that feels natural is a personal choice. Think about grips you have tried rather than assuming a larger one must suit you better.
The texture is another detail to consider, especially if you have a clear preference for how a grip feels in your hands. The maker does not give its diameter, weight or texture pattern.
For the counterbalanced putter configuration, no separate counterweight figure is supplied. You can compare the stated design, but you cannot calculate its weight distribution from the maker's description.
Understand the shaft and angles
This is a heel shafted putter with a steel shaft. The shaft has a double bend that creates offset at address. Those features describe how the shaft meets the head and how the club presents when you set it down.
The stated loft is 3 degrees, and the lie angle is 72 degrees. These are useful comparison points if you know the specifications of a club that already suits you. The listed flex is Uniflex.
Do not infer an adjustable design from those figures. The maker does not describe adjustment settings or give instructions for changing the angles. If you are planning alterations, discuss them with a club fitter first.
A double bend shaft putter can look different at address from other shaft configurations. Product images can help you decide whether that look matches your preferences, even though they cannot replace holding the club.
Separate playing length from item dimensions
The stated putter length is 35 inches. The separate item dimensions are 4.3 inches long, 3.5 inches wide and 36 inches high.
Those figures should not be treated as competing playing lengths. They appear as different specification fields, and the maker does not explain the measurement method used for the item dimensions.
The weight is listed as 0.64 kg, with 1.4 pounds also given in the item specifications. No individual head weight or grip weight is stated.
When comparing a 35 inch mallet putter with another option, use matching measurements where possible. Compare playing length with playing length, and total item weight with total item weight. Comparing a full club weight with another model's head-only weight would be misleading.
Check what comes in the box
The pack contains one F80 putter. It is not a set, and the listed pack count and item count are both one.
A head cover is specifically not included. That is worth knowing before buying, particularly if you want to protect the head from knocks in a bag or during transport. Any separate cover would need to be chosen on its own merits.
The listed finish color is Black/Red. The material type is alloy steel, with steel specified for the shaft and rubber for the grip. The country of origin is not stated.
These details also help when buying a gift. Confirm the recipient's playing hand, usual putter length and grip preference first. A suitable-looking club may still be the wrong fit.
Use practice to learn the setup
When trying a different putter, give yourself time to notice its features without changing everything at once. Start by checking how the length feels in your normal stance and whether the sight lines are easy to read.
Then pay attention to the oversized grip and impact sound. These are personal observations, not a test you need to pass. The goal is to learn whether the club's setup agrees with your preferences.
Keep expectations tied to the product details. The mallet weighting, face insert and alignment guide each have a stated purpose, but none can promise a particular result for every player.
Keep care simple
After use, wipe the head and steel shaft with a soft damp cloth, then dry them. Avoid abrasive cleaners that could mark the surfaces.
The textured rubber grip can be cleaned gently with mild soap and water when needed. Let it dry before storage. Putting a damp club away for a long period is best avoided.
Protect the head from knocks during transport. Since a cover is not included, check what protection your current bag setup provides.
Review delivery, returns and warranty
Check the estimate for your address before ordering, especially if you are buying for a birthday or another fixed date.
The stated warranty is one year against manufacturer defects. Detailed claim instructions are not provided by the maker, so ask for those terms if they affect your decision.
Change-of-mind returns are available within 14 days of delivery, with the customer paying return postage. Your rights under the consumer protection law of your state also apply. Keep the delivery date in mind and contact us promptly if the club is not suitable.
The short version
Choose this model for its stated combination of a right-handed, 35-inch setup, high-MOI mallet head and T-shaped alignment guide. The oversized counterbalanced grip, double-bend steel shaft and soft face insert are the other main points to weigh.
Check fit before focusing on appearance. Confirm that you want the listed grip style, note that no head cover is included, and review the delivery and return terms. That gives you a practical basis for deciding whether this putter suits your next round.

